10%OFF New

MKS SBASE V1.3 Controller Board+3.2″ MKS TFT32 LCD Touch Screen for 3D Printer


$114.9 $103.4

In stock

Compare
Sold By : bay4bay SKU: 312137710257. Category:
Store category

Sign Up Now !

You may also like
MKS SBASE V1.3 Controller Board+3.2″ MKS TFT32 LCD Touch Screen for 3D Printer
Product Description

This Kit includes high quality MKS SBASE V1.3 Controller Board and 3.2″ TFT LCD Touch Screen.

 

MKS SBASE V1.3
 
Download firemware, please contact us.
Overview
 

MKS SBASE is a latest motherboard for 3D Printer ,designed by Makserbase (MKS).

It is based on ARM platform and uses 32bit 100M Cortex-MS MCU-LPC1768.

 

Features

 

1. Using 32bit 100M Cortex-M3 MCU-LPC 1768, and improve its performance highly.

2. Support highly modular open source firmware , easy for secondary development.

3. Support network function, then proceed remote control via IE Explorer.

4. Using DRV8825 stepper driver which supports 32-microstep and with excellent cooling.

5. Currents of the stepper motor can be set directly, which can avoid the damage .

6. Using high quality FR-4 4 layers PCB and special design for cooling.

7. Using professional power chip, support 12V-24V DC input.

8. Good to work with MKS LCD12864 and MKS TFT touch screen.If you use the other 12864 we can’t sure it can work .

(Can’t work with MKS MINI12864LCD,OLED12864 and LCD2004 display.)

Wiring

Wiring is based on available information.

MKS SBASE and MKS TFT Touch Screen

How to use

 

1.Copy “firmware.bin” and “config” from config file to SD card (SD smaller than 64Gb)
. Need to change config name .

For example .

2. Adjust config.txt according to the configuration .

3.Refer to MKS-SBASE PIN , make correction connection. Such as stepper motor ,endstops.

4.Plug the SD card to the board, after power on, it will automatic update .

5.If connect computer with USB, need to install the driver (Refer to below specification ).

 

Install the Driver

 

First, you should upload the zip file.

Then, plug the USB to computer . Next, enter device manger .

Then will turn up COM after install successfully.

 

Download Firmware and Update

 

Please upload firmware (please contact us to receive the firmware link )

Copy configuration (including firmware.bin and config.txt) to SD card, insert to the board and power on, it will automatic update .

After successful updated, the file name will turn into firmware.cur.

Others

1.Support Gcode. Please refer to <help>G-Codes.htm .

2.Main parameter setting

It is very easy to set the parameter . First, open config.txt on SD card, then modify the parameters and save. Re-power on.

Details on parameter, please refer to Configuration_Options.

 
 
 
MKS TFT32 3.2” LCD Display
 
User Manual:  please contact us.
 

MKS-TFT32 is a colorful touch screen LCD, it is suitable for many main board, such as MKS BASE, MKS GEN, MKS MINI, MKS SBASE, etc.
Don’t like MKS TFT28, MKS TFT32 do not support external power supply, can’t work with Ramps1.4.

Connect to MKS BASE,MKS MINI

Boot Setting
Step1: turn on MKS TFT32 at first time, then enter –> setting –> connection, select baud rate that the firmware use.
Step2: enter –> setting –>model, choose printer type, only Delta and other two options
Others: enter –> setting –> touch screen correction, improving accuracy.

Firmware Update
Copy the latest update firmware to SD card root directory, including:
1. mkstft32.bin.
2. mks_config.txt.
3. mks_pic.
Please do not adjust the file name. Insert SD card, it will update automatically after restarts.

WIFI Connection
1. MKS TFT can support MKS WIFI module.
2. After MKS TFT works with MKS WIFI module, can use Printrun, Repetier-Host to proceed remote connect and control. But it may make some functions unavailable.
mks_config.txt basic configuration
1. Configuration on single and double nozzle : change the value after the colon of “cfg_sprayer_counter” into the nozzle you need.(“1”is single nozzle; “2” is double nozzle )
2. Heated bed configuration: change value after the colon of “cfg_custom_bed_flag” into custom requirements you need.(“1” is with heated bed; “0” is without heat bed)

 

 
Package include:
1 x MKS TFT32 3.2” LCD Display
1 x MKS SBASE board
2 x Cable
1 x USB cable

 






  • Payment methods accepted
    : PayPal only.

  • All major credit cards
    are accepted through our secure payment processor
    PayPal.


  • Payment must be received within 7
    business days of auction closing.

  • As a buyer, it is your duty to pay the
    import duties and taxes
    , Local Taxes,
    VAT, or
    other hidden charges when you
    make an order from abroad.

  • We ONLY ship to your
    PayPal address. Please make sure your PayPal address is
    correct before you pay.
  • We ship your orders within
    1 business days after the payment cleared.
  • Item shipped from via Post Air Mail, reach most of the
    countries within 15 to 20 days.
  • Delivery time depends on destination and other factors, it may takes
    up to 20 days. If you don’t receive the item after 30 days, please
    contact us, we’ll investigate and solve the delivery problem.

Post Airmail Estimated Arrival Time Schedule

Country Business Days (exclusive
weekend and holiday)
<10 10-14 15-21 22-28 29-35

>35

USA

Percentage of Arrival

5.2%

37.2%

33.5%

18.8%

4.5%

Refund

Canada

Percentage of Arrival 3.2% 40.1% 29..7% 22.3% 4.0%

Refund

Australia

Percentage of Arrival 20.9% 46.90% 19.3% 8.9% 3.8%

Refund

UK

Percentage of Arrival 9.8% 50.9% 26.1% 7.4% 3.7%

Refund

France

Percentage of Arrival 5.5% 27.6% 45.5% 17.2% 6.9%

Refund

Germany

Percentage of Arrival 5.7% 21.3% 31.9% 20.9% 18.5%

Refund

Scandinavia

Percentage of Arrival 5.5% 25.8% 42.8% 20.1% 5.8%

Refund

Other Country

Percentage of Arrival 3.5% 19.8% 39.8% 28.2% 6.8%

Refund

If you have any enquiries, please do not hesitate to contact us through eBay contact seller message.
We appreciate your positive feedback and ALL 5 stars DSR score if you are satisfy with the transaction. Our system will automatically do the same for you by just a moment.

  • You have 7 days to contact us and 30 days to return it from the
    date it was received, return shipping is to be
    paid by the Buyer.
  • All returned items MUST BE in the original packaging and you
    MUST PROVIDE us with the shipping tracking number, reason for the
    return, and your eBay ID.
  • We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the
    item in its original condition and packaging with all components and
    accessories included, AFTER BOTH Buyer and Seller cancel the
    transaction from eBay. OR, you may choose to have a replacement.

  • At any time you can email or eBay message us for any question. We will reply within two business days. Reply
    might be delayed during holiday and long weekend.
  • If you do not get our reply in time,  please resend the
    email and login to your My eBay message center and send
    message again.
  • Our office hours are:
    9:00 a.m. to 18:00 p.m. (GMT +8) of Monday to Friday
    9:00 a.m. to 12:00 p.m. (GMT +8) of Saturday

 

 



To Fit

3D Printer

MPN

Does Not Apply

Brand

KOOKYE

UPC

Does not apply

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.